FEATURES
• Rugged, towable, stand-alone fire fighting system that can be deployed anywhere
• Combines sophisticated EYESPY™ multi-sensor flame detection with effective AFFF (aqueous film forming foam) fire suppressant
• Quick-action mechanism begins agent discharge within seconds of a fire emergency
• Delivers 500 gallons of AFFF premix agent through automatic oscillating turret
• Microprocessor-based with built-in test systems (BITS) for greater reliability and maximum false alarm immunity
• Integrates with common radio transceivers and most fire alarm panels
• Operates on AC power or maintenance-free battery with solar panel recharging
• Easily deployed - can be set up by one person in 15 minutes or less
• Built to strict U.S. military specifications for extra long service life
APPLICATIONS
• Unsprinklered Hi-Risk, Hi-Value Hazards
• Aircraft Hangers and Maintenance Areas
• Hazardous Spill Clean-Up Operations
• Temporary Depots or Distribution Centers
• Outposts Beyond Fire District Jurisdiction
• New Construction or Hot Work Sites
• Hi-Value Vehicle and Aircraft Refueling
• Flammable Liquid Loading and Unloading
• Remote Areas With Limited Water Supply
• Capital Equipment Leasing Situations
SPECIFICATION
• Trailer: The system trailer shall be of welded steel construction and comply with U.S. Department of Transportation Safety Regulations 49 CFR 393
• Agent Tank Assembly: The tank shall be welded steel construction built to the latest ASME Unfired Pressure Vessel Code
• Actuation: Unit actuation shall incorporate an Underwriters Laboratories listed quick opening (QO) nitrogen cylinder valve
• Expellant Nitrogen System: Unit agent shall be expelled by gas pressure from nitrogen gas cylinder(s) conforming to the requirements of DOT 3AA. Cylinder size and quantity shall provide for both agent discharge and unit purge requirements
• Agent Hand Hose Line and Nozzle: Agent hand hose line shall be 1 in. diameter UL 92 booster hose fitted to the discharge requirements of the unit
• Hose Storage: Hose reel(s) shall be of steel construction suitable for the length and weight of hose
• Automatic Discharge Turret: An automatic oscillating discharge turret shall be provided
• Agent Tank Purge and Blowdown: The system shall be designed so that, after use, components that are normally dry (valves, piping, hoses, nozzles, etc.) can be purged of AFFF agent and blown clean
• Power: The system shall include a battery power system capable of powering the detection, control and activation functions for 120 continuous hours in standby mode
• Detection and Control: The detection and control system shall meet NFPA 72 requirements where applicable
• Diagnostics, Alarm and Signaling: The detection system shall include a built-in test system (BITS) to check and report detector sensitivity, wiring continuity, and system logic
• Fabrication and Finish: The system shall use material and parts designed for rough handling, durability, and extended exposure to weathering

PHYSICAL DESCRIPTION
  Flame Sensitivity

  "Flash Fire" full UV/IR saturation: approx. 50 milliseconds
  1 ft. x 1 ft. (.3 m x .3m) gasoline fire @ 50 ft. (15.7m): 3 seconds
  2 ft. x 2 ft. (.61 m x .61m) gasoline fire@ 100 ft. (30.5m): 4 seconds

  Field of View

   90 full cone coverage with left/right source determination
  Approvals   Factory Mutual (FM) approved, complies with NFPA 72, MIL-STD 810E